[SouthFL_ILX]

9th Gen Civic Si Invidia Q300 catback. Bolts up fine. A 98% match for the ILX but the shop had to heat the pipe before the muffler and pull at the tip to get the exhaust tip perfectly on center (the tip was pulling towards drivers side and rubbing the valence). I had an idea something like this would be the case- this is why I didn’t bolt it up myself.

Sounds great. Throaty and performance sounding with some pops when letting off the gas. Not loud or annoying. No drone.

 

[SouthFL_ILX]

Looks great 👍👍👍👍👍👍👍

Do you have more information to get it online? Exact model or link to a page

Regards

Sure!
SKU is HS12HC4G3S
I got it from Emnotek

Invidia Q300 Catback Exhaust Civic Si Sedan (2012-2014)

The Invidia Q300 catback exhaust system for the Honda Civic Si sounds as good as it looks. The Q300 features mandrel bent 70mm stainless steel piping and a free flowing oval style sport muffler to provide better exhaust flow for improved performance.

emnotek.com

 

[SouthFL_ILX]

Of note!
A) An exhaust place will probably have to heat and the pipe before the muffler and pull the tip towards center of the bumper cutout for correct alignment.

B) If your car is lowered, the Invidia catback midpipe is known to droop a little low- will scrape on steep ramp and curb cut transitions. It’s already happened on my car as I’ve entered a parking garage with a steep ramp, but given the sound quality (not loud) and performance (it’s actually a bit more responsive on throttle tip in) I was looking for, I’m ok with it.